DECLARATORIA de vigencia de la Norma Mexicana NMX-U-122-SCFI-2016

DECLARATORIA de vigencia de la Norma Mexicana NMX-U-122-SCFI-2016.

Al margen un sello con el Escudo Nacional, que dice: Estados Unidos Mexicanos.- Secretaría de Economía.- Subsecretaría de Competitividad y Normatividad.- Dirección General de Normas.

DECLARATORIA DE VIGENCIA DE LA NORMA MEXICANA NMX-U-122-SCFI-2016, RECUBRIMIENTOS, PINTURAS, BARNICES Y PRODUCTOS AFINES-EVALUACIN DE LA DEGRADACIN DE RECUBRIMIENTOS-DESIGNACIN DE LA CANTIDAD Y TAMAÑO DE LOS TIPOS MÁS COMUNES DE DEFECTOS Y DE LA INTENSIDAD DE LOS CAMBIOS UNIFORMES DE APARIENCIA.
La Secretaría de Economía, por conducto de la Dirección General de Normas, con fundamento en lo dispuesto por los artículos 34, fracciones II, XIII y XXXIII de la Ley Orgánica de la Administración Pública Federal; 3, fracción X, 51-A, 51-B y 54 de la Ley Federal sobre Metrología y Normalización; 45 y 46 del Reglamento de la Ley Federal sobre Metrología y Normalización y 22, fracciones I, IX, XII y XXV del Reglamento Interior de la Secretaría de Economía y habiéndose satisfecho el procedimiento previsto por la ley de la materia para estos efectos, expide la Declaratoria de Vigencia de la Norma Mexicana que se enlista a continuación, misma que ha sido elaborada y aprobada bajo la responsabilidad del Comité Técnico de Normalización Nacional de Pinturas, Barnices, Recubrimientos y Tintas para Impresión, lo que se hace del conocimiento de los productores, distribuidores, consumidores y del público en general.
El texto completo de la Norma Mexicana que se indica puede ser adquirido en la Dirección General de Normas de la Secretaría de Economía, ubicada en Avenida Puente de Tecamachalco número 6, colonia Lomas de Tecamachalco, Sección Fuentes, Naucalpan de Juárez, código postal 53950, Estado de México o en la página de Internet http://www.economia-nmx.gob.mx/normasmx/index.nmx
La presente Norma Mexicana NMX-U-122-SCFI-2016 entrará en vigor 60 días naturales después de la publicación de esta Declaratoria de Vigencia en el Diario Oficial de la Federación. SINEC-20160725172404122.
CLAVE O CDIGO
TTULO DE LA NORMA MEXICANA
NMX-U-122-SCFI-2016
RECUBRIMIENTOS, PINTURAS, BARNICES Y PRODUCTOS AFINES-EVALUACIN DE LA DEGRADACIN DE RECUBRIMIENTOS-DESIGNACIN DE LA CANTIDAD Y TAMAÑO DE LOS TIPOS MÁS COMUNES DE DEFECTOS Y DE LA INTENSIDAD DE LOS CAMBIOS UNIFORMES DE APARIENCIA
Objetivo y campo de aplicación
Esta Norma Mexicana establece un sistema general de evaluación para designar la cantidad y tamaño de los defectos, así como la intensidad de los cambios de apariencia de recubrimientos, pinturas, barnices y productos que formen película. Se pretende que este sistema sea utilizado, principalmente, para evaluar los defectos causados por envejecimiento y exposición a la intemperie, tanto natural como artificial, así como para los cambios uniformes, por ejemplo cambios de color, tal como el amarillamiento.
En esta Norma Mexicana también se proporcionan otros sistemas de evaluación concretos para los tipos más comunes de defectos, así como las guías visuales de referencia que ilustran las cantidades y los tamaños de dichos defectos.
Concordancia con Normas Internacionales
Esta Norma Mexicana no es equivalente (NEQ) con ninguna Norma Internacional, ya que no existe referencia alguna al momento de su elaboración.
Bibliografía
-  ISO 4628-1:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system.
-  ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering.
 
-  ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting.
-  ISO 4628-4:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking.
-  ISO 4628-5:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking.
-  ISO 4628-6:2011 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method.
-  ISO 4628-7:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method.
-  ISO 4628-8:2012 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect.
-  ISO 4628-10:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion.
-  ASTM D610-08(2012) Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces, ASTM International, West Conshohocken, PA, 2012, www.astm.org
-  ASTM D660-93(2011), Standard Test Method for Evaluating Degree of Checking of Exterior Paints, ASTM International, West Conshohocken, PA, 2011, www.astm.org
-  ASTM D661-93(2011) Standard Test Method for Evaluating Degree of Cracking of Exterior Paints, ASTM International, West Conshohocken, PA, 2011, www.astm.org
-  ASTM D662-93(2011) Standard Test Method for Evaluating Degree of Erosion of Exterior Paints, ASTM International, West Conshohocken, PA, 2011, www.astm.org
-  ASTM D714-02(2009) Standard Test Method for Evaluating Degree of Blistering of Paints, ASTM International, West Conshohocken, PA, 2009, www.astm.org
-  ASTM D772-86(2011) Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints, ASTM International, West Conshohocken, PA, 2011, www.astm.org
-  ASTM D1654-08 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments, ASTM International, West Conshohocken, PA, 2008, www.astm.org
-  ASTM D2803-09 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal, ASTM International, West Conshohocken, PA, 2009, www.astm.org
-  ASTM D4214-07 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films, ASTM International, West Conshohocken, PA, 2007, www.astm.org
-  ASTM D7087-05a(2010) Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments, ASTM International, West Conshohocken, PA, 2010, www.astm.org
 
Ciudad de México, a 19 de septiembre de 2016.- El Director General de Normas y Secretariado Técnico de la Comisión Nacional de Normalización, Alberto Ulises Esteban Marina.- Rúbrica.